Flow Control Icon
Industrial Hydrant & Valve Applications

3"-24" Resilient Wedge NRS Gate Valve with Indicator Plate

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is available with an indicator plate. The plate is designed to accommodate the installation of an indicator post. The valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed and FM Approved as well as Certified to NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372, which demonstrates compliance to the U.S. Safe Drinking Water Act (SDWA).

Triple O-ring Stem Seals

Sealing the lubrication chamber is a series of three O-ring stem seals. The O-rings help to isolate the lubrication chamber.

Thrust Washers

Two thrust washers are used. One is located above, and one is located below the thrust collar. These thrust washers provide easy operation.

Ductile Iron Construction

The ductile iron body, bonnet and wedge provide strength and a pressure rating that meets or exceeds the requirements of AWWA C515. The tensile strength of ductile iron is more than twice that of cast iron. This added strength makes the Series 2500 more durable and rated at 250 psig. This strength and higher pressure rating is provided in a compact, lightweight and easy-to-handle ductile iron valve.

Fusion-Bonded Epoxy

The Series 2500 valve is epoxy coated on the interior and the exterior. The fusion-bonded epoxy coating is applied prior to assembly. The bolt holes and body-to-bonnet flange surfaces are fully epoxy coated.

Pressure-Energized Bonnet Gaskets

The body-to-bonnet seals incorporate pressure-energized o-rings which reduces the need for excessive bolt loading required by designs that use flat gaskets. The gaskets are typically reusable, which reduces downtime during any needed repair.

The Series 2500 Ductile Iron Resilient Wedge Gate Valve with Indicator Plate has these standard features:

  • UL Listed and FM Approved, as applicable

  • 250 psig ANSI/AWWA pressure rating

  • 4” - 24” valves are available in configurations which are UL Listed and FM Approved with a 250 psig rated working pressure. 

  • Complies with ANSI/AWWA C515

  • Certified to NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372

  • Fusion-bonded epoxy coating complies with ANSI/AWWA C550

  • Fully rubber-encapsulated wedge

  • Triple O-ring stem seals

  • Thrust washers

  • Valves have a smooth, larger-than-nominal waterway

  • 100% leak-tight closure

  • Valves have an all ductile iron body

Read More
Contact Sales

Product Line Information

Project Mgt/Customer Service
Product Alerts

Contact Sales

Reach out to our sales team for more information.
Contact Sales

Today's Infrastructure Solutions in the U.S. and Around the Globe.

About Us
American Mark