Flow Control Icon
2"-12" Series 2500 RW NRS Gate Valves

2"-12" Resilient Wedge NRS Gate Valves with Flanged Ends

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed and FM Approved.

Triple O-ring Stem Seals

Sealing the lubrication chamber is a series of three O-ring stem seals. The O-rings help to isolate the lubrication chamber.

Thrust Washers

Two thrust washers are used. One is located above, and one is located below the thrust collar. These thrust washers provide easy operation.

Ductile Iron Construction

The ductile iron body, bonnet and wedge provide strength and a pressure rating that meets or exceeds the requirements of AWWA C515. The tensile strength of ductile iron is more than twice that of cast iron. This added strength makes the Series 2500 more durable and rated at 250 psig. This strength and higher pressure rating is provided in a compact, lightweight and easy-to-handle ductile iron valve.

Fusion-Bonded Epoxy

The Series 2500 valve is epoxy coated on the interior and the exterior. The fusion-bonded epoxy coating is applied prior to assembly. The bolt holes and body-to-bonnet flange surfaces are fully epoxy coated.

Pressure-Energized Bonnet Gaskets​

The body-to-bonnet seals incorporate pressure-energized o-rings which reduces the need for excessive bolt loading required by designs that use flat gaskets. The gaskets are typically reusable, which reduces downtime during any needed repair.

The Series 2500 Ductile Iron Resilient Wedge Gate Valve has these standard features:

  • All Ductile Iron Construction

  • Complies with ANSI/AWWA C515

  • UL Listed and FM Approved

  • Certified to NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372

  • 250 psig AWWA UL and FM pressure rating

  • Fusion-bonded epoxy coating complies with ANSI/AWWA C550

  • Triple O-ring stem seals

  • Thrust washers

  • Smooth waterway design

  • 100% leak-tight closure

  • Also available in 4"–12" class 250 raised face, per ASME B16.1, class 250 for cast iron flanges

Read More
Contact Sales

Number of Turns

SERIES 2500/2500-1

Valve Size









No. of Turns
to Open









Product Line Information

project mgt/customer service
Product Alerts

Contact Sales

Reach out to our sales team for more information.
Contact Sales

Today's Infrastructure Solutions in the U.S. and Around the Globe.

About Us
American Mark