The AMERICAN Series 2500 Ductile Iron Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems, as well as irrigation and backflow control systems. The Series 2500 is available in applicable configurations that are rated to 250 psig ANSI/AWWA requirements and is UL Listed and FM Approved.
Two thrust washers are used. One is located above and one is located below the thrust collar. These thrust washers provide easy operation.
The ductile iron body, bonnet and wedge provide strength, durability and a pressure rating that meets or exceeds the applicable requirements of AWWA C515. The tensile strength of ductile iron is more than twice that of cast iron. This added strength makes the Series 2500 more durable and allows it to be rated at 250 psig. This strength and higher pressure rating is provided in a compact, lightweight and easy-to-handle ductile iron valve.
The Series 2500 valve is epoxy coated on the interior and the exterior. The fusion-bonded epoxy coating is applied prior to assembly. The bolt holes and body-to-bonnet flange surfaces are fully coated.
The body-to-bonnet seals incorporate pressure-energized o-rings which reduces the need for excessive bolt loading required by designs that use flat gaskets. The gaskets are typically
Ductile Iron Construction
250 psig ANSI/AWWA pressure rating, as applicable
UL Listed in Applicable Configurations
Certified to NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372
Triple O-Ring stem seals
Epoxy coating inside and out in accordance with ANSI/AWWA C550
Thrust washers and adjustable packing type stem seals
Lifting Devices
Zero leakage
Dual sealing body to bonnet gaskets
EPDM Encapsulated Ductile Iron Wedge With Polymer Guide Covers
Class 250 raised face flanges available
Valves 14"–24" shall be resilient wedge gate valves, of a outside stem and yoke design and rated for 250 psig cold water working pressure. The valve shall have a cold water rated working pressure of 250 psig. All cast ferrous components shall be ductile iron and shall be manufactured in compliance with the latest edition of ANSI/AWWA C515. The valve shall also be UL Listed inapplicable configurations. The valve design shall be lightweight, easy to handle, and constructed with wall thickness as defined in Table 2 of ANSI/AWWA C515. Heavy wall and/or cast gray-iron bodies are not acceptable. The valve shall have a smooth and oversize waterway and have the marking “D.I.” or “Ductile Iron” and the designation C515 cast on the body. The valve wedge shall be constructed of ductile iron and provided with protective wedge guide covers in sizes. All wedges shall be encapsulated with EPDM rubber. The valve shall be Certified to NSF 61-G.
Valve stems shall be constructed of stainless steel and supported by a ductile iron yoke and follower. Stems shall be sealed by packing which is held in place by a bronze gland. Packing shall be easily replaced and/or adjusted in the field.
All exterior valve body bolting shall be Type 304 stainless steel and shall be provided with hexagonal heads, with dimensions conforming to ANSI B18.2.1. Metric size and/or socket head cap screws or bolts, are not allowed. All body gaskets shall be of the pressure energized O-ring style design.
All internal and external ferrous surfaces of the valve body and bonnet shall have a fusion-bonded epoxy coating, complying with ANSI/AWWA C550. The coating shall be electro-statically applied prior to assembly.
All valves shall be the AMERICAN Series 2500 Resilient Wedge Gate Valves.
