American-Darling® and Waterous Pacer® Hydrants with ALPHA Bases


When specifying AMERICAN Flow Control Hydrants, be sure to include the following requirements:

  • Hydrant inlet shall be designed for multi-purpose material use with a wide range of pipe outside diameters (O.D.).
  • Inlet shall incorporate a stab-fit design requiring the use of only one Type 304 stainless steel fastener. The assembly of flange or mechanical joint restrainers using multiple fasteners or wedge bolts is not permitted.
  • Restraint accessories shall be factory installed.
  • All hydrant inlets shall be the ALPHA design, furnished by AMERICAN Flow Control.