The Series 2100 Hydrant Security Check Valve is the solution to securing all makes and models of fire hydrants in your system. The check valve is equipped with MJ x Solid Gland ends. It connects easily to the MJ shoe of the fire hydrant and is restrained.
The check valve is independent of the hydrant shoe. Therefore, it can be installed on all hydrants in inventory or even those previously in service. Unlike units that are integral to the fire hydrant, you can reuse the Series 2100 Security Check Valve should the need arise. The Series 2100 is Certified to NSF/ANSI 61 and NSF/ANSI 372 demonstrating complicance with the U.S. Safe Drinking Water Act (SDWA).
Proven reliable check valve design
Works with all fire hydrants
Independent of the hydrant
250 psig rated working pressure
Product is Certified to Certified to NSF/ANSI 61 and NSF/ANSI 372
Ductile iron body, bonnet and disc
All body to bonnet fasteners are Type 304 stainless steel
The body and cover are fusion-bonded epoxy coated inside and outside
Only one moving part
No O-Rings, packing, pins, bushings or bearings to wear out
Zero leakage at pressures above 5 psig
The 100% unobstructed flow area is free of pockets that can trap debris
Notes
All ferrous components are constructed of ductile iron conforming to ASTM A536.
Mechanical joint ends are in accordance with ANSI/AWWA C111/A21.11.
Valves have manufacturer’s name, pressure class and year of manufacture marked on body or bonnet.
Body and bonnet coated with fusion bonded epoxy coating in compliance with ANSI/AWWA C550.
250 PSIG rated working pressure, 500 PSIG test pressure.
Disc is ductile iron with stainless steel shaft and nylon reinforcement, encapsulated with EPDM rubber.
