Flanged Fittings

AMERICAN provides a complete line of standard as well as many special flanged fittings for various types of service, including water, sewage and air.

ANSI/AWWA C110/A21.10 Fittings

Most of the flanged fittings furnished by AMERICAN are manufactured in accordance with the requirements of this standard. Such fittings in this section are designated with the heading “ANSI/AWWA C110/A21.10.” The AWWA C110 fitting flanges have facing and drilling that match AWWA C115 threaded-on flanges (see Flanged Joint Pipe) and which also match ANSI B16.1 class 125 flanges.

AMERICAN provides some fittings that are not included in AWWA C110, including long-radius 90° bends, reducing bends, wyes and various other fittings commonly used in plant piping. These have AWWA C110 flanges and are denoted by the heading “AMERICAN Standard.” Pressure ratings shown are AMERICAN Standard and are based on AWWA C110 design principles.

AWWA C110 flanges are adequate for a water working pressure of 250 psi with the body of the fitting being suitable for 150 or 250 psi as indicated. In some cases, these fittings have been supplied for greater water working pressure applications, particularly when used with AMERICAN Toruseal gaskets.

ANSI/AWWA C153/A21.53 Fittings

54", 60" and 64" fittings are manufactured in accordance with AWWA C153. Flanges match AWWA C115 and ANSI B16.1 (class 125) flanges and are adequate for a water working pressure of 250 psi. (64" flanges match 66" flanges. See the table in Standard Dimensions). The bodies of these fittings are suitable for 150 psi or 250 psi as indicated. In some cases, these fittings have been supplied for greater water working pressure applications, particularly when used with AMERICAN Toruseal gaskets.

Fittings Class 250 F&D

Except for a transition fabricated pipe from an ANSI B16.1 class 250 flange to a standard AWWA C110 flange, AMERICAN no longer furnishes fittings with flanges faced and drilled per ANSI B16.1 class 250.

Pressure Ratings

As noted in AWWA C111, flange joints in the 24" and smaller sizes may be rated for up to 350 psi with the use of special gaskets such as AMERICAN’s Toruseal gasket.

Furthermore, AMERICAN is able to rate flange pipe and fittings higher than 350 psi on special applications.

Information on fittings class 250 F&D previously furnished by AMERICAN can be found in the Guide to Historical Data.

Wyes are special. Substituting a pipe with a lateral welded-on outlet may be more economical and offer quicker shipment. See Special Fittings or contact AMERICAN. A tee with a 45° bend may also offer quicker shipment.

Numerals on cuts indicate standard order of specifying size of fitting.

The center-to-face designations “M”, “N” and “P” are used for straight size wyes as well as reducing wyes; however, in Standard Dimensions the letters “D” and “E” are used for specifying center-to-face dimensions for straight size wyes.

Size (in.)		Pressure Rating (psi)	Dimension in Inches					Weight (lbs.)
Run	Branch	Pressure Rating (psi)	T	T 1	M	N	P	Weight (lbs.)
4	4	250	0.52	0.52	12	3	12	80
6	4	250	0.55	0.52	14.5	3.5	14.5	115
6	6	250	0.55	0.55	14.5	3.5	14.5	125
8	4	250	0.6	0.52	17.5	4.5	17.5	180
8	6	250	0.6	0.55	17.5	4.5	17.5	190
8	8	250	0.6	0.6	17.5	4.5	17.5	215
10	4	250	0.68	0.52	20.5	5	20.5	260
10	6	250	0.68	0.55	20.5	5	20.5	270
10	8	250	0.68	0.6	20.5	5	20.5	295
10	10	250	0.68	0.68	20.5	5	20.5	325
12	4	250	0.75	0.52	24.5	5.5	24.5	380
12	6	250	0.75	0.55	24.5	5.5	24.5	395
12	8	250	0.75	0.6	24.5	5.5	24.5	420
12	10	250	0.75	0.68	24.5	5.5	24.5	455
12	12	250	0.75	0.75	24.5	5.5	24.5	495
14	6	250	0.82	0.55	27	6	27	520
14	8	250	0.82	0.6	27	6	27	545
14	10	250	0.82	0.68	27	6	27	580
14	12	250	0.82	0.75	27	6	27	620
14	14	250	0.82	0.82	27	6	27	665
16	6	250	0.89	0.55	30	6.5	30	680
16	8	250	0.89	0.6	30	6.5	30	710
16	10	250	0.89	0.68	30	6.5	30	740
16	12	250	0.89	0.75	30	6.5	30	785
16	14	250	0.89	0.82	30	6.5	30	830
16	16	250	0.89	0.89	30	6.5	30	885
18	4	250	0.96	0.52	25	1	27.5	275
18	6	250	0.96	0.55	25	1	27.5	450
18	8	250	0.96	0.6	25	1	27.5	625
18	10	250	0.96	0.68	32	7	32	885
18	12	250	0.96	0.75	32	7	32	930
18	14	250	0.96	0.82	32	7	32	975
18	16	250	0.96	0.89	32	7	32	1025
18	18	250	0.96	0.96	32	7	32	1075
20	8	250	1.03	0.6	29	1	29.5	740
20	10	250	1.03	0.68	27	1	29.5	805
20	12	250	1.03	0.75	35	8	35	1170
20	14	250	1.03	0.82	35	8	35	1215
20	16	250	1.03	0.89	35	8	35	1270
20	18	250	1.03	0.96	35	8	35	1315
20	20	250	1.03	1.03	35	8	35	1390
24	6	250	1.16	0.55	31.5	0.5	34.5	1060
24	8	250	1.16	0.6	31.5	0.5	34.5	1080
24	10	250	1.16	0.68	31.5	0.5	34.5	1105
24	12	250	1.16	0.75	31.5	0.5	34.5	1200
24	14	250	1.16	0.82	40.5	9	40.5	1750
24	16	250	1.16	0.89	40.5	9	40.5	1805
24	18	250	1.16	0.96	40.5	9	40.5	1855
24	20	250	1.16	1.03	40.5	9	40.5	1930
24	24	250	1.16	1.16	40.5	9	40.5	2095
30	12	250	1.03	0.75	49	10	49	2795
30	14	250	1.03	0.66	49	10	49	2850
30	16	250	1.37	0.89	49	10	49	2905
30	18	250	1.37	0.96	49	10	49	2960
30	20	250	1.37	1.03	49	10	49	3040
30	24	250	1.37	1.16	49	10	49	3205
30	30	250	1.37	1.37	52.5	18.3	52.5	4125
36	12	250	1.15	0.75	60	19.5	60	4490
36	14	250	1.15	0.66	60	19.5	60	4505
36	16	250	1.58	0.89	54	15.3	54	4455
36	18	250	1.58	0.96	54	15.3	54	4505
36	20	250	1.58	1.03	54	15.3	54	4575
36	24	250	1.58	1.16	54	15.3	54	4725
36	30	250	1.58	1.37	56	15.3	56	5200
36	36	250	1.58	1.58	60	19.5	60	6310
42	12	250	1.28	0.75	68.5	21	68.5	5725
42	14	250	1.28	0.66	68.5	21	68.5	5800
42	16	150	1.28	0.7	68.5	21	68.5	5850
42	18	150	1.28	0.75	68.5	21	68.5	6000
42	20	250	1.28	0.8	60	12	60	6110
42	24	250	1.28	0.89	60	12	60	6255
42	30	250	1.78	1.37	63	12	63	6855
42	36	150	1.78	1.58	66	12	66	7650
42	42	150	1.78	1.78	71	15	71	9170
48	12	250	1.42	0.75	77	22.5	77	7200
48	14	250	1.42	0.66	77	22.5	77	7275
48	16	250	1.42	0.7	77	22.5	77	7400
48	18	150	1.42	0.75	65	9	65	7620
48	24	250	1.96	1.16	58	5	64	6840
48	30	250	1.96	1.37	63	9	68	8015
48	36	250	1.96	1.58	69	7	72	8970
48	42	150	1.96	1.78	77	12	77	11010
48	48	150	1.96	1.96	77	16	77	12100

True Wyes

Size (in.)		Pressure Rating (psi)	Dimension in Inches				Weight (lbs.)
Run (1)	Branch (2) & (3)	Pressure Rating (psi)	T	T 1	A	E	Weight (lbs.)
4	4	250	0.52	0.52	6.5	3	55
6	6	250	0.55	0.55	8	3.5	85
8	8	250	0.6	0.6	9	4.5	140
10	8	250	0.68	0.60	9	5	155
10	10	250	0.68	0.68	11	5	205
12	8	250	0.75	0.6	9	5.5	210
12	10	250	0.75	0.68	12	5.5	-
12	12	250	0.75	0.75	12	5.5	300
14	14	250	0.82	0.82	14	6	435
16	16	250	0.89	0.89	15	6.5	580
18	18	250	0.96	0.96	16.5	7	680
20	20	250	1.03	1.03	18	8	960
24	24	250	1.16	1.16	22	9	1370

1.) Contact AMERICAN if higher pressure ratings are required.

Note: Reducing true wyes are not available in 24" and smaller sizes.

Note: AWWA C110 and C153 do not include data on wyes of any size. Please contact AMERICAN for verification of dimensions on all wyes.

ANSI/AWWA C110/A21.10 Fittings

ANSI/AWWA C153/A21.53 Fittings

Fittings Class 250 F&D

Pressure Ratings

True Wyes

Product Line Information

Contact Sales

Today's Infrastructure Solutions in the U.S. and Around the Globe.